| Now that you have the box in front of you where do you
start.
First things first, open the box and check to make sure all the items
the manufacturer said should be in the box. Once you have determined
everything is there your ready to start.
Depending on the DCC system you have purchased will determine if you
will need an additional power supply. Here is a list of the systems
Southern Digital sells that require a separate power supply that in not
included in your box.
 | Digitrax Super Chief Starter Set |
| Digitrax Radio Super Chief Starter Set |
| Digitrax Super Empire Builder Set |
| Digitrax Radio Super Empire Builder Set |
| NCE Pro |
| NCE Radio Pro. |
All of the above systems require a separate power supply.
These systems have their power supply included:
| Digitrax Zephyr |
| NCE Power Cab. |
On the Digitrax system you will find a white connector with seven (7)
screw terminals. Each of the screw terminals are labeled on the
system.
On the left side of this page select the system you will be setting up.
|
