Signal Elec.

View Contents of my Shopping Cart

What's New Digitrax Sets NCE Set N Decoders HO Decoders O/G Decoders DCC Sound Throttles Boosters DCC Accessories HO Signals N-Signals Signal Elec. PC Acc/Soft Power Peco Track DigiFrames Supplies/Acc. Live Steam Pre-Owned Help Service About S.D. Links DCC Clubs

   Stock #

 

Call Us (770) 929-1888

 

 

Departments
Home

Security provided by:
 
Southern Digital ABS Signaling System  Digitrax Signaling System  Logic Rail Signal Animation System

 

Southern Digital Automatic Block Signaling (ABS) System
The Southern Digital ABS Signaling system is completely automatic and has been designed to be used with the Digitrax BDL-168 track detection system.  This system will work with both LED or incandescent lit signal heads like the Sunrise Signals on our web site on our signal page.

Stock #

Description

 Select to view

 Qty
BDL-168 Digitrax BDL168 LocoNet Universal Block Occupancy Detector for 16 Blocks.  Complete LocoNet Occupancy detection (with NO DS54 required). Gives you local occupancy & zone power status reporting via fascia mounted LED's &/or computer.  Used in conjunction with the Digitrax SE8C for detection.

MSRP $149.99

Your Price $120

TS-8

 

target.gif (8173 bytes)

ABS Target Signal Circuit Board 

Controls Eight Target / Search Light Color Signals that use bi-color/tri-colored LEDs.  
ts8module.jpg (132117 bytes)
ex8ts8.jpg (173992 bytes)

MSRP $89.95

Built Price $72 

MSRP $51.95

Kit  Price $42

SL-4x2

 

Dbl_Signal.gif (3677 bytes)

ABS Signal Circuit Board

The Signal Control Board will control signals in 4 blocks in 2 directions.  Each signal head must be equipped with either 3 lamps or 3 LEDs (Red, Yellow & Green) like the example on the left.  For more details press the Info button. 

MSRP $119.95

Built Price $96

 

MSRP $94.95

Kit Price $76

EX-1

 

 Missing Link  

Interface between Digitrax BDL-168 and a TS-8 or SL4x2,

Supports 4 detection Zones.

EX-1.gif (100651 bytes)

MSRP $25.95

Built Price $20 

 

EX-8

 

 Missing Link  

Interface between Digitrax BDL-168 and a TS-8 or SL4x2,

Supports 8 detection Zones.

ex8s.jpg (84889 bytes)

MSRP $35.95

Built Price $29 

MSRP $29.95

Kit Price $24

 

  Complete Signaling System

(The Digitrax Signaling system is controlled by PC Software or your Digitrax Throttle.)

Stock #

Description

 Select to view

 Qty

SE8C

 Digitrax Signal Controller.  This unit can control up to 32 signal heads and 8 switch motors and is used in conjunction PC Software or your Digitrax throttle.  Additional accessory items below can complete your signaling system to be entirely Plug & Play.  See system schematic for details. (A 12 Volt external Power Supply is required like the PS-12)

 

MSRP $125 

Your Price $100
BD-4

 

 Digitrax BD-4 block detector is designed to interface with the Digitrax Stationary Decoder DS-54, SE8C Signal Controller only.  statdec_bd4.jpg (17386 bytes)

MSRP $29.95

Your Price $24.00

 

SMHK

Digitrax Signal Mast Hardware Kit is for mounting the Digitrax signal heads on to your layout.

 

MSRP $9.95

Your Price $9.20

SMBK

Digitrax Signal Mast Base Kit. Each kit contains 3 mast bases with temporary masts.  The mast can be removed and the base used as a connection point for your prototype signal heads like the Sunrise signals.  You can find the Sunrise signals on our signal page.

  

MSRP $14.95

Your Price $12

TSMK

Digitrax Terminal Strip Mounting Kit.  This unit can be used instead of the SMBK above to connect your existing signal to like the Sunrise signals on our signal page.  The 10 pin connector on the right side of the picture is used for connecting to the Digitrax SE8C board.  

MSRP $14.95

Your Price $12

SDCK

Digitrax Signal Diver Cable Kit.  This kit includes 30' of 10 conductor ribbon cable and 8 connectors.  This Kit is to be used to connect either the SMBK or TSMK to the Digitrax Signal Controller board SE8C.

MSRP $19.95

Your Price $16

 
EDGE

44 Pin Edge Connector 3 Pack

MSRP $11.95

Your Price $9.55 

 

CML Electronics Automatic DCC Signal System

SIGM-20

 The SIGM20 is an automatic controller for  eight signals. It  sets the signal state automatically according to the state of the trackwork (e.g. points), other signals and block occupancy detectors. It does this automatically, without any other computers involved: so no PC is required to operate the railway. The board can control simple blocks, simple and complex junctions ....automatically.

SigM20.gif (101146 bytes)

MSRP $115.00

Your Price $97.75

DTX-8

  

The DTX8 is an add-on board to drive LEDs and can be used in two different ways:

bullet

The DTX8A can be used with the DAC10, and drives LEDs for each of the "closed" and "thrown" aspects to show the position of each point;

bulletThe DTX8B drives an additional 8 LEDs allowing 2 extra signals to be added to the SIGM20.

DTX8LED.gif (34161 bytes)

MSRP $29.95

Your Price $23.99

 

Logic Rail Signal Animation System

Stock #

Description

 Select to view

 Qty

GCP

 Prototypical control of grade crossing signals (LED or bulbs) and gates  

MSRP $42.95

Your Price $38.65

SA-1

 Logic Rail Signal Animator is the easiest and least expensive method of controlling LED signals other then a manual toggle switch.  See info for the details  wpe33D.gif (71816 bytes)

MSRP $20.95

Your Price $18

SAD-2

 Logic Rail Signal Animator is the easiest and least expensive method of controlling signals with LAMPS other then a manual toggle switch.  See info for the details  wpe33D.gif (71816 bytes)

MSRP $22.50

Your Price $19

SA1PS

Additional Photo Cell for SA-1 above.  

Your Price $1.75

 

   Back Home Next

Send mail to sodigi@mindspring.com with questions or comments about this web site. 

Copyright © 1998 through 2007 

SOUTHERN DIGITAL Railroad Hobbies (770) 929-1888  Fax (770) 679-0300   

Last modified:  April 08, 2008